3 Introduction to configuration and
commissioning
Topics covered in this chapter:
•
Configuration flowchart
•
Default values and ranges
•
Enable access to the off-line menu of the display
•
Disable write-protection on the transmitter configuration
•
HART security
•
Restore the factory configuration
3.1 Configuration flowchart
Use the following flowchart as a general guide to the configuration and commissioning
process.
Some options may not apply to your installation. Detailed information is provided in the
remainder of this manual. If you are using the Weights & Measures application, additional
configuration and setup are required.
Introduction to configuration and commissioning
Configuration and Use Manual 17