Filter
Top Products
Appendix B: Automatic Measurements Supported
B-10
CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual
Table B- 2: Supported measurements and their definition (Cont.)
Measurements Annotation descriptions
Time
measurement
annotations
These annotations are not visible when the reference level units are absolute instead of a percentage.
Rise Time 2 horizontal arrows facing each other at the high and low ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Fall Time 2 horizontal arrows facing each other at the high and low ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
+Duty Cyc 3 horizontal arrows on the mid ref indicating the start, mid, and end time. End arrows point
toward each other and the mid arrow points toward t he positive part of the cycle.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
--Duty Cyc 3 horizontal arrows on the mid ref indicating the start, mid, and end time. End arrows point
toward each other and the mid arrow points toward t he negative part of the cycle.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Pos Width 2 horizontal arrows facing each other at the mid ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Neg Width 2 horizontal arrows facing each other at the mid ref indicating the s tart and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Period 2 horizontal arrows facing each other at the mid ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Freq 2 horizontal arrows facing each other at the mi d ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Delay 2 horizontal arrows pointing toward each other at their own mid refs indicating the
start and end time. In detailed mode there are 4 horizont al bars indicating the highs and lows.
More
measurement
annotations
Area None
Cyc Area 2 horizontal arrows facing each other at the mi d ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.
Phase 3 horizontal arrows indicating the crossing positions and 4 horizontal bars
indicating the highs and lows.
Burst Wid 2 horizontal arrows at the mid ref indicating the start and end time.
In detailed mode there are 2 horizontal bars indicat ing the high and low.