Filter
Top Products
9 - 1
9. SPECIAL ADJUSTMENT FUNCTIONS
9. SPECIAL ADJUSTMENT FUNCTIONS
POINT
The functions given in this chapter need not be used generally. Use them
if you are not satisfied with the machine status after making adjustment
in the methods in Chapter 8.
If a mechanical system has a natural resonance point, increasing the servo system response may cause
the mechanical system to produce resonance (vibration or unusual noise) at that resonance frequency.
Using the machine resonance suppression filter and adaptive vibration suppression control functions can
suppress the resonance of the mechanical system.
9.1 Function block diagram
0
except
except
Servo
motor
Parameter
No.62
Parameter
No.63
Parameter
No.63
Current
command
Machine resonance
suppression filter 1
Adaptive vibration
suppression control
Encoder
Machine resonance
suppression filter 2
Speed
control
00
00 0
1
00
1
or
2
00
Low-pass
filter
Parameter
No.61
9.2 Machine resonance suppression filter
(1) Function
The machine resonance suppression filter is a filter function (notch filter) which decreases the gain of
the specific frequency to suppress the resonance of the mechanical system. You can set the gain
decreasing frequency (notch frequency) and gain decreasing depth.
Mechanical
system
response
Machine resonance point
Frequenc
y
Notch
depth
Notch frequency
Frequency