Filter
Top Products
Configuration and Use Manual 161
Device Profile
Device Profile IndexDisplay CodesMenus
5 Display
variable 2
USINT Set NV Displays the variable
associated with the code
on the local display
See Table C-15 for
codes. All codes are
valid.
6 Display
variable 3
7 Display
variable 4
8 Display
variable 5
9 Display
variable 6
10 Display
variable 7
11 Display
variable 8
12 Display
variable 9
13 Display
variable 10
14 Display
variable 11
15 Display
variable 12
16 Display
variable 13
17 Display
variable 14
18 Display
variable 15
19 Enable
start/stop totals
BOOL Set NV Enable or disable the
ability to start and stop
totals from the local
display
•0 = Disabled
•1 = Enabled
20 Enable reset
totals
BOOL Set NV Enable or disable the
ability to reset totals from
the local display
•0 = Disabled
•1 = Enabled
21 Enable auto
scroll
BOOL Set NV Enable or disable the auto
scroll feature. The scroll
rate is set using
Attribute 1.
•0 = Disabled
•1 = Enabled
22 Enable offline
menu
BOOL Set NV Enable or disable the
offline menu
•0 = Disabled
•1 = Enabled
23 Enable alarm
menu
BOOL Set NV Enable or disable the
alarm menu
•0 = Disabled
•1 = Enabled
24 Enable ACK All
alarms
BOOL Set NV Enable or disable the
ability to acknowledge all
the alarms at once
•0 = Disabled
•1 = Enabled
25 Enable IrDA
write protect
BOOL Set NV Enable or disable the
write-protect feature on
the IrDA port
• 0 = Disabled (reading
and writing allowed)
• 1 = Enabled (read
only)
Table C-9 Local Display Object (0x68) – Instance 1 continued
Attrib
ID Name Data type Service Mem Description Comments