Filter
Top Products
94 Micro Motion
®
Model 2400S Transmitters for DeviceNet
™
Measurement Performance
Figure 10-3 Meter verification procedure – DeviceNet tool
Step 2
Set uncertainty limit (optional)
Step 3
Start/abort procedure
Step 1
Set output state (optional)
Able to
complete?
Step 9
Check abort code
CAUTION
Yes (>0)
Step 4
Check current algorithm state
Running?
Step 5
Read percent complete
Yes (=16)
Step 7
Check inlet stiffness
Within limits? No (>0)
Yes (=0)
Step 8
Check outlet stiffness
Within limits? No (>0)
Yes (=0)
CAUTION
PASS
No (<16)
No (=0)
Manual abort (optional)
Step 6
Check algorithm abort state
See Table 10-1 for the device profile
information for each step.