A SERVICE OF

logo

Open as PDF
next previous
C1624M-F (9/07) 61
Activating Relays
The WS5000 may be used to activate output relays manually, connecting Endura devices to other external devices. A relay may be activated for a
predetermined period of time (the dwell time) or may remain latched until there is another signal to release the relay. Configure relays from the
Devices tab in the Setup screen.
To activate a relay:
1. From the Tools menu, select Activate Relay (CTRL + ALT + R) to display the Select Relay dialog box.
Figure 66. Tools Menu: Activate Relay
2. Click the radio button beside the relay you want to activate.
3. Click Activate, or click Cancel to exit without activating the relay. Click Clear Selection to deactivate a previously selected relay.
Figure 67. Activating a Relay