118 C1624M-F (9/07)
Figure 132. Selecting Devices
7. To limit a role’s access to devices, click the “Select all devices” check box at the top of the dialog box to deselect it.
8. You can mix and match your device selections from all three windows. Note that if you have not set up any locations or camera groups, you
will need to use the “Select individual devices” area. To assign groups of devices (by location or camera group) or to select devices
individually from a list:
a. Navigate to the desired item by clicking the Plus sign (+) to expose lower levels of the hierarchy and the Minus sign (–) to hide lower
levels.
b. Click the locations you want to assign to the role, and then click Add. The location names appear in the Selected Locations column.
c. Click the camera groups you want to assign to the role, and then click Add. The group names appear in the Selected Camera Groups
column.
d. Click the individual devices you want to assign to the role, and then click Add. The device names appear in the Selected Devices column.
9. To remove a location, camera group, or device from a role, click to select it from the appropriate Selected list, then click Remove.
10. When you have finished selecting devices, click OK. To exit the dialog box without saving the additions, click Cancel.
11. Select the sorting order from the drop-down list in the upper-right corner.
