100 C1624M-F (9/07)
8. Enable alarms. This window lists the available alarms by name and physical input number. Click the check box beside each alarm you want
to enable on the encoder.
9. Enable relays. This window lists the available relays by name and physical input number. Click the check box if you want to enable the relay
on the encoder.
10. Enable additional settings as follows:
• Motion detection: If available, select the “Enable motion detection service” check box to turn on motion detection for the selected
encoder.
• Audio: If available, select the “Enable audio service” check box to record audio along with video for the selected encoder.
• Video termination: If available, select the “Enable video termination” check box to ensure that the video stream is terminated at the
selected encoder. Video termination lessens the effects of ghost images on the final device when several video devices are connected
together in a chain. This option is available only on ENC5316 encoders, which utilize software to terminate the video stream.
11. Click the Configure button. A login dialog box appears in a Web browser.
12. Enter a user name and password for the device that you are configuring, and then click the “Log on” button.
13. Follow the instructions in the configuration/operation manual that was provided with the device. Instructions for configuring these devices
is also available in online Help after you log on to the Web page.
14. Click Apply to save the settings. Click OK to exit and save the settings if not already saved. Click Cancel to exit without saving the new
settings.
Figure 116. Wireless Encoder Configuration
