C1624M-F (9/07) 131
4. Enter a name for the event group.
5. Click OK. The new event group appear on the screen. Information about that event group appears.
6. Edit the settings for the event group.
a. Click the alarms or motion events you want to add to the group, and then click Add. The alarms and motion events appear in the
Assigned Events column.
b. To remove an event, click to select it from the Assigned Events column, and then click Remove.
c. Select a severity level for the event group. Choices are Critical, Major, Normal, and Minor.
Diagnostic messages are considered critical. Assign the other severity levels to different events based on your business needs. For
example, you might assign the Normal severity level to all door alarms or the Major severity level to all motion alarms.
7. When you have finished adding events, click OK. To exit the window without saving the event group, click Cancel.
EDITING AN EVENT GROUP
1. Click the Setup button .
2. Click the Event Groups tab .
3. Click the event group name to select it. Information about that event group appears.
4. Edit the settings for the event group.
a. Click the alarms and motion events you want to add to the group, and then click Add. The alarms and motion events appear in the
Assigned Events column.
b. To remove an event, click to select it from the Assigned Events column, and then click Remove.
5. When you have finished editing the event group, click OK. To exit the window without saving the event group, click Cancel.
DELETING AN EVENT GROUP
1. Click the Setup button .
2. Click the Event Groups tab .
3. Click the event group name to select it. Information about that event group appears on the screen.
4. Click Delete. A confirmation dialog box appears.
5. Click Yes to confirm the deletion. Click No to close the window without deleting that event group.
Figure 150. Delete Event Group Confirmation Dialog Box
