Texas Instruments TMS320C2802 Stereo System User Manual


 
Borrow
Reset
Timer Reload
SYSCLKOUT
TCR.4
(Timer Start Status)
TINT
16-Bit Timer Divide-Down
TDDRH:TDDR
32-Bit Timer Period
PRDH:PRD
32-Bit Counter
TIMH:TIM
16-Bit Prescale Counter
PSCH:PSC
Borrow
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com
SPRS230L–OCTOBER 2003–REVISED DECEMBER 2009
4 Peripherals
The integrated peripherals of the 280x are described in the following subsections:
Three 32-bit CPU-Timers
Up to six enhanced PWM modules (ePWM1, ePWM2, ePWM3, ePWM4, ePWM5, ePWM6)
Up to four enhanced capture modules (eCAP1, eCAP2, eCAP3, eCAP4)
Up to two enhanced QEP modules (eQEP1, eQEP2)
Enhanced analog-to-digital converter (ADC) module
Up to two enhanced controller area network (eCAN) modules (eCAN-A, eCAN-B)
Up to two serial communications interface modules (SCI-A, SCI-B)
Up to four serial peripheral interface (SPI) modules (SPI-A, SPI-B, SPI-C, SPI-D)
Inter-integrated circuit module (I2C)
Digital I/O and shared pin functions
4.1 32-Bit CPU-Timers 0/1/2
There are three 32-bit CPU-timers on the 280x devices (CPU-TIMER0/1/2).
CPU-Timer 0 and CPU-Timer 1 can be used in user applications. Timer 2 is reserved for DSP/BIOS™.
These timers are different from the timers that are present in the ePWM modules.
NOTE
If the application is not using DSP/BIOS, then CPU-Timer 2 can be used in the
application.
Figure 4-1. CPU-Timers
Copyright © 2003–2009, Texas Instruments Incorporated Peripherals 53
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015