Filter
Top Products
Studio Color LCD Controller
Preparing to Program
4-3
4
Preparing to Program
Before beginning any programming, make sure the controller
appears as shown below:
Figure 4-1. Before programming, make sure the
controller’s Address LED is ON, the Select and
Standby LEDs are both OFF, and the controller is
displaying the Intensity, Memory and Page.
Toggle the
<Standby>
key until the Standby LED turns OFF.
Toggle the
<Address>
key until the Address LED turns ON.
Toggle the
<Menu>
key until Intensity, Memory and Page is
showing in the LCD display.
Toggle the
<Select>
key until the Select LED turns OFF.
ADVANCE
LIGHTWAVE
audio
level
erase
recordselect
home
pagecursorcons truct
PAGEMEMORYINTENSITY
MEMORY CARD
POWER
STANDBY
rate
USER
aut o
PRESET
ADDRESS
1
3
5
7
2
4
6
8
12
3
4
56
7
8
slave
Studio Color
Address LED on
Standby LED off
Select LED off
LCD display shows Intensity, Memory,
Page
Intensity: 99 Memory: x Page: x