Filter
Top Products
Studio Color LCD Controller
Specifications
1-5
1
Cables and Connectors
• DMX data cables: Belden
®
9841 or equivalent (meets
specifications for EIA RS-485 applications) with
characteristics listed below:
• 2-conductor twisted pair plus a shield
• maximum capacitance between conductors - 30 pF/
ft.
• maximum capacitance between conductor and shield
- 55 pF/ft.
• maximum resistance of 20 W/1000 ft.
• nominal impedance 100–140 W
• 22–24 AWG with insulation having a dielectric
rating of 300 volts or higher
• DMX data connectors: Standard 3-pin male and female
XLR connectors
• DMX data terminators: Male XLR connector with 120
ohm terminator (see Chapter 2)
• All other cables (listed below): 2-conductor shielded
cable
• Master/Slave cable
• Remote Enable cable
• Stereo Audio Input cable
• Remote enable connector: 3.5 mm (1/8 in) tip/ring
connector as shown in Figure 6-6 on page 6-30.
• Connectors listed below: 6mm (1/4 in) tip/ring/sleeve
connector
• Master/Slave connector
• Stereo Audio Input connector
• Cables for backing up or restoring memory using a
personal computer: see Chapter 7