Filter
Top Products
3-6
Front Panel Descriptions
Studio Color LCD Controller
RAM card slot: Insert a RAM card (Type 1, 256KB SRAM
PC Card) into this slot to store a copy of the controller’s
operating system, to install an updated version of the
operating system, or to transfer programs into or out of the
controller’s memory. For more information, see Chapter 7.
Select/Record/Erase keys:
• Select key: Use this key for programming, editing, and
manual control of selected fixtures. For more
information about programming, see Chapter 4.
• Record key: In Address mode, this key records the
current page/scene for the selected fixture numbers
(fixtures). In Preset mode, this key records a preset. For
more information about programming, see Chapter 4.
• Erase key: Use this key to erase page memory, or to
create an “un-initialized” page. For more information
about un-initialized pages, see the section titled “Step 2:
Record Un-Initialized Pages” on page 4-14.
Advance/Rate controls:
• Auto (advance) key: When you press this key, the
controller advances pages automatically at a rate set by
the
<Rate>
knob. For more information, see the section
titled “Setting Rate and Delay Time” on page 4-18.
• Rate knob: Use this knob to regulate the speed of page
changes in auto advance. For more information, see the
section titled “Setting Rate and Delay Time” on page
4-18.
• Audio knob: Use this knob to adjust the controller’s
audio sensitivity. For more information, see the section
titled “Audio Input Playback” on page 6-27.
• (Audio) level LED: Displays the presence and relative
strength of the audio input signal. For more information,
see the section titled “Audio Input Playback” on page
6-27.
select
record
erase
auto
rate
audio
level