Filter
Top Products
Studio Color LCD Controller
Connecting Fixtures
2-11
2
• If the firmware version is above 38, you have three
options: crossloading firmware from another fixture on
the same DMX link, using the Studio Color Upload
Module, or using Status Cue. Consult the Studio Color
User’s Manual for details about crossloading.
Setting A Fixture Number
You must assign a unique fixture number, from 1 through 8,
to each Studio Color fixture you wish to respond
independently to control commands. Multiple fixtures can be
assigned the same fixture number if you want them all to
respond to the same set of control commands.
Note The Studio Color fixture has several built-in random
(or unsynchronized) effects which work randomly
even if multiple fixtures are assigned the same fixture
number. For more information, see the section titled
“Programming Hints” on page 3-2.
Do not use a fixture number higher than 8 because the
controller will send only fixture numbers 1—8.
The order in which you assign fixture numbers is not
important; use any numbering scheme you wish. (For
example, the first fixture in the link does not have to be
fixture number 1; it could be fixture number 8.)