Filter
Top Products
3-8
Using the Construct Keys
Studio Color LCD Controller
Construct keys: Allow you to program Studio Color
fixtures. For more information, see the section titled “Using
the Construct Keys” on page 3-8.
Home key: Pressing this key then pressing one or more
Address keys closes the shutter and returns the selected
fixtures’ wheels and motors to their default (home) positions.
For more information, see the section titled “Homing
Fixtures” on page 4-29.
Joystick: Use the joystick to position the beams of selected
fixtures during beam programming. For more information,
see the section titled “Position Key (POS)” on page 3-19.
Using the Construct Keys
There are 14 Construct keys on the controller’s front panel
that allow you to custom program Studio Color fixture
features.
The Construct keys are shown in Figure 3-3. Descriptions of
all keys begin on the next page. Appendix B has a complete
listing of all constructs, their allowed values and their default
values.
Figure 3-3. The 14 Construct keys control features
of the Studio Color fixture.
Note The 4 unlabeled keys are not used by the Studio Color
LCD controller.
home
Not used Not used Not used
Not used