Filter
Top Products
Studio Color LCD Controller
Random Advance
6-29
6
Random Advance
Random advance when used with auto advance, manual
advance or audio advance (and optionally all-memory
playback) plays initialized pages in random order. (Random
advance when enabled by itself does nothing.)
First press the
<Auto>
key, then enable random advance. By
default, the User
<1>
key is defined as random advance. If
you have already programmed a macro on the User
<1>
key,
see the section titled “Accessing Default Definitions” on page
6-13.
Note Random Advance will sequence through initialized
pages in different memories if you have selected all-
memory playback as described in the section titled
“All-Memory Playback” on page 5-11.
Live Control of Auto Playback
This section explains how to have “live” control (override)
over all of the constructs of one or more fixtures. For
example, an activity occurs that you want to track with a “live
spot”. You could quickly select a fixture to use as a spot and
manually control its position with the joystick.
1. Press the
<Select>
key. The Select LED flashes.
Note You must press the
<Select>
key to stop the controller
on a page that is not using a preset position or else you
will not be able to change the beam position using the
joystick.
2. Press the
<Address>
keys corresponding to the fixtures you
wish to control. You can now change (override) any of the
fixtures’ constructs; however, you cannot record the changes
made during “live” control.