Filter
Top Products
Studio Color LCD Controller
Homing Fixtures
4-29
4
Homing Fixtures
Homing a fixture causes its shutter to close, its lamp to strike
(if off), and for all wheels and motors to return to their home
(default) positions.
1. At any time, press the
<Home>
key on the controller’s front
panel. The
<Home>
LED flashes.
2. While the
<Home>
LED is flashing, press the Address key(s)
corresponding to the fixture(s) you want to home.
3. The Home and selected Address LEDs now flash for another
10 seconds and the fixtures perform their homing operations.
Note Pressing
<Home>
after selecting the fixture numbers
allows you to continue programming or playing back
while the fixtures are homing.
4. The Address LEDs turn OFF when homing is finished.
5. After homing, the fixture waits for its next command. If a
fixture fails to home, refer to the Studio Color User Manual
for troubleshooting suggestions.
6. Once homed, the fixtures join the sequence running (if any).