Filter
Top Products
Studio Color LCD Controller
Selecting MSC or LSC
5-9
5
3. Press the Cursor
<Down>
arrow key to display the menu
options shown below:
4. Use the Cursor
<Right>
and
<Left>
arrow keys to select ;)
, as shown below:
5. Press the Construct
<Up>
and
<Down>
arrow keys to change
the selection between
77;D)9/ or ;
$2$(0*D).
6. Use the Cursor
<Left>
arrow key to select 7 and
continue with the next section.
Setting the Device ID
The device ID is used by MSC and LSC to identify master
controllers.
• In LSC, ID 0 (zero) means that the device responds to
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
• MSC uses device ID 127 instead of ID 0 to tell a device
to respond to any ID.
E7G7 G) ) 3,
7A 5
G G) ;7 0-/: 3,
;$2$(0*D)