Filter
Top Products
5-10
Selecting MSC or LSC
Studio Color LCD Controller
If you are continuing from the previous section, begin with Step 3.
1. Enter the menu system by pressing the
<Menu>
key.
2. Select
; from the Main menu, as shown below:
3. Press the Cursor
<Down>
arrow key. The LCD display
appears as shown below:
4. The LCD display above indicates the controller is currently
set for the default ID of 0.
5. Use the Construct
<Up>
and
<Down>
arrow keys to change the
value of the
7. Values range from 1 to 223 for LSC
and 0 to 126 for MSC.
• In LSC, ID 0 (zero) means that the device responds to
any ID.
• MSC uses device ID 127 to tell a device to respond to
any signal.
6. Press the Cursor
<Right>
and
<Left>
arrow keys to select
another menu item, or press the Cursor
<Up>
arrow key to
return to the Main menu.
7. If you selected MIDI Show Control, you must power cycle the
controller. Turn the power OFF then back ON.
) ;:-(
-D((
E7G7 G) ) 3,
7A 5