Filter
Top Products
Studio Color LCD Controller
IBM-Compatible
7-19
7
6. Press and hold the
<Record>
key (about 10 seconds) on the
controller’s front panel until the LCD display shows the
following message:
7. The Lightwave Research Backup menu should now display
an identical message.
• If so, press Y on your computer’s keyboard.
• If not, you have not selected a file to store the backup.
Repeat the previous steps.
8. The next menu shows which drive, directory and file you will
back up to.
• If the displayed information is correct, press the
<Record>
key on the controller’s front panel to begin the download.
• If the displayed information is incorrect, press
<ESC>
on
your computer and start the procedure over.
9. The controller’s LCD display appears similar to the following
while the download is taking place. The controller backs up
every page of every memory, including unprogrammed pages
and all locked memories:
Note To stop the download at any time, press the
<ESC>
key on your computer’s keyboard, then press the
<Select>
key on the controller’s front panel.
10. The controller display returns to normal and a message is
displayed on the Lightwave Backup software menu when the
transfer is complete.
D);$2$-
;77()</
D);$2$
*#'-#''