Filter
Top Products
Studio Color LCD Controller
Connecting Fixtures
2-9
2
Connecting Fixtures
The Studio Color LCD controller uses its native DMX 512
protocol (language) to control Studio Color fixtures.
Confi
g
urin
g
the Fixtures
Before using the controller with Studio Color fixtures, you
must do both of the following:
• Verify each fixture is using firmware version 38c or later.
• Select a fixture number for each fixture.
Verifying the Firmware Version
You can verify the firmware version using the fixture’s Info
menu as described below:
1. Press and hold down the
<Menu>
button on the fixture until
the menu appears as shown below:
Figure 2-2. The fixture’s Addr(ess) menu is at the top
level in the Studio Color menu system.