Filter
Top Products
Studio Color LCD Controller
Macintosh
7-25
7
3. Connect the Mac-to-modem cable to the DB25 end of the
adapter. See Figure 7-7:
Figure 7-7. Connecting a Macintosh to the
controller for download/upload.
Setting Up the Software
You must follow the procedure in this section before either
backing up controller memory to your computer, or restoring
memory from the computer to the controller.
Setup Summary
The detailed procedure that follows is based on White Knight
only; if you have another communication program, make sure
you set it for all of the following:
• 9600 baud
• 8 data bits, 1 stop bit
• Ignore parity
• Full duplex
• VT100 terminal emulation
White Knight v11.14 Setup Procedure
The procedure that follows is based on White Knight v11.14.
Consult the documentation provided with your copy of White
Knight if you are using a different version.
Make sure you have already connected the cabling as
Modem/printer port
Mac-to-modem
cable
Controller RS-232C port
DB25 (female) to
DB9 (male) adapter