Filter
Top Products
3-20
Using the Construct Keys
Studio Color LCD Controller
suppose you have programmed all 99 pages of
memory 9 as position presets. All 99 position presets
are available for fixture number 1, all 99 position
presets are available for fixture number 2, etc.
Delay Key
Use this key to set the amount of time you want the controller
to pause on the current page in the loop before advancing to
the next page in the loop. You can select from 0 seconds to
99 seconds, or you can select
6) which will hold on the
page indefinitely until you manually advance (press the Page
<Up>
arrow key to advance). 6) is between the settings of 0
and 99.
The advance rate set by the
<Rate>
knob changes the delay
time. Turning the
<Rate>
knob clockwise subtracts from the
Delay setting; turning the
<Rate>
knob counter-clockwise
adds to the Delay setting.
Note If the controller is using audio advance, the Delay and
Rate settings are ignored.
For more information about the
<Rate>
knob, see the section
titled “Setting Rate and Delay Time” on page 4-18.
rate
shorter than
Delay setting
longer than
Delay setting