Filter
Top Products
Studio Color LCD Controller
All-Memory Playback
5-11
5
All-Memory Playback
This section describes how to auto advance or random
advance through all 99 pages in all nine memories. (Only
initialized, or programmed, pages will play back.)
Enablin
g
All-Memory Playback
Make sure the controller is ready for programming as shown
in Figure 4-1 on page 4-3.
Press the Cursor
<Up>
and
<Down>
arrow keys until the LCD
display shows either:
+)) or 8)), as shown below:
To access
+)) or 8)), do the following:
• 1-all: Press Cursor
<Down>
on memory 1.
• 9-all: Press Cursor
<Up>
on memory 9.
If you select
+)) and also press the
<Auto>
key, the
initialized (programmed) pages in memory 1 begin playing
back starting with page 1. When the controller completes
playing back memory 1’s initialized pages, it advances to
memory 2, and plays back all of its initialized pages. This
playback process continues through memory 9, page 99 then
repeats until you disable all-memory playback.
Pressing the User
<1>
key randomizes the order of the pages
being played back. For more information about the User
keys, see the section titled “User Key Macros” on page 6-9.
Disablin
g
All-Memory Playback
Press the Cursor
<Up>
and
<Down>
arrow keys until “-all” no
longer appears as part of the Memory value in the LCD
display.
7#88#+))-*#'