Filter
Top Products
Studio Color LCD Controller
Glossary
G-1
Glossary
Access Modes
The controller offers the following two remote access modes:
• Page access: An attached analog controller accesses
pages in memory. See Chapter 6 for more information.
• Preset access: An attached analog controller access
presets, either by 12-level preset access or binary preset
access as described in Chapter 6.
Address Mode
A mode of the controller that allows you to directly access
fixtures for programming pages. The Address LED on the
<Address>/<Preset>
key is ON to indicate the controller is in
this mode.
Advance Modes
The controller offers the following four ways to advance the
pages in memory:
• Manual advance: Use the Page
<Up>
and
<Down>
arrow
keys to manually advance through pages in memory.
• Auto advance: Pressing the
<Auto>
key on the
controller’s front panel causes pages to advance
sequentially at the rate determined by the Delay construct
and the
<Rate>
knob. This is the way to play back loops.
• Audio advance: Vary the rate of page advance; stop
page advance; and modulate color and dim changes using
an external audio source. See Chapter 6 for more
information.
• Random advance: When used with auto advance (and
optionally all-memory playback), sequences through
initialized (programmed) pages in random order.
PRESET
ADDRESS