Filter
Top Products
Studio Color LCD Controller
Macintosh
7-27
7
1. Toggle the
<Standby>
key on the controller’s front panel until
the Standby LED turns ON.
2. Press and hold the
<Record>
key on the controller’s front
panel until the LCD display appears as shown below:
3. Your computer screen should display the following message:
Save from controller to PC.
Set PC to receive, then press RECORD to begin.
Press SELECT to quit anytime.
4. On your computer, press Command+F+N to start the file
capture. Enter a file name in the Capture File to Save text
field and click Save.
5. Press the
<Record>
key on the controller’s front panel to start
the transfer. The controller’s LCD display appears as shown
below while the transfer is taking place:
Note If you use White Knight, at the bottom of your screen
you will see a long series of characters that
increments as data is being sent. This is normal.
6. The controller’s LCD display returns to normal when the
transfer is complete. Press the
<Select>
key on the
controller’s front panel to stop the download.
7. Press Command+F+C on your computer to end the file
capture.
D);$2$-
;77()</
D);$2$
*#'-#''