3Com 6416SW Manual

A SERVICE OF

next previous

User Passwords

1. Log on to 6416SW using the administrator password.

2. At the management prompt, type the SET DEVICE PASSWORD USER command:

ONcoreATM> set device password user

Then press Enter.

3. In the next three fields displayed, enter the administrator password and the new

user password (up to fifteen characters) twice as shown here:

Enter current administrator password: {admin password}

New password: {new user password}

Re-enter password: {new user password}

Then press Enter. You are prompted when the password is accepted:

Password changed.

4. To save your new user password, type the SAVE DEVICE or the SAVE ALL

command:

ONcoreATM> save device

Then press Enter.

5-8 ONcore ATM Switch/Control Module: Installation and User's Guide