LAN Emulation Client (LE only)
In order for SNMP to run properly, every device in the network must have a unique IP
address and subnetwork mask. In a LAN emulation subnetwork, you must use the SET
DEVICE LAN_EMULATION_CLIENT command to assign a unique IP address and
subnetwork mask to the 6416SW.
To configure the LEC, use the SET DEVICE LAN_EMULATION_CLIENT with the
following parameters:
LAN type
IP address
Subnetwork Mask
Individual MAC address
Associated LES ATM address
Notes:
1. The MAC address must be in a 802.3 format. Local and universal administrated
MAC addresses are supported.
2. The associated LES ATM address is the address of a LES monitoring the 802.3
emulated LAN. The LES must be a LE Forum compliant LES, connected to an
ONcore hub.
3. The LEC does not support a LECS connection.
4. The maximum frame size and emulated LAN name are provided by the associated
LES.
5. The SET DEVICE LAN_EMULATION_CLIENT command automatically starts the
LEC.
6. No command to stop the LEC is available.
For example, to configure the LEC with IP address 9.100.20.55:
5-19
