A SERVICE OF

logo

Automatic Modem Hangup
If you use a modem to connect to the 6416SW, you can use the SET TERMINAL
HANGUP command to automatically hang up the modem connection when you log off
the 6416SW. If you do not hang up the modem connection, an unauthorized user can
pick up your open session and work in it.
The following command shows what to enter to automatically hang up the modem after
you log off the 6416SW. The command is set by default to disable so that the modem
does not automatically hang up.
ONcoreATM> set terminal hangup enable [ENTER]
4-16 ONcore ATM Switch/Control Module: Installation and User's Guide