4. Message: File not found/file-not-found.
You tried to upload without specifying the name of the file to be uploaded.
Specify the name of the file.
5. Message: File too big/file-too-big.
There is no space left on the server. Check that space is made available before
retrying the upload.
TFTP: Download Inband fails from your ONcore hub
Explanation: The download inband can be done either from the terminal console
(console or Telnet) or from the SNMP Manager (ATMC or MIB Browser).
Before performing any download, make sure that the machine hosting the TFTP server
can ping the ONcore hub.
When an download fails, an error code is returned. That error code can be different
between the terminal dialog and the ATMC/MIB browser, which is why both return
codes are documented.
Note: When the download fails from the terminal dialog (console or Telnet), check the
return code by using the SHOW TFTP command.
1. Messages: Error/generic error..Host Access Violation...Access Rights
Violation/access-rights-violation...File already exists/file-already exits..
The file that you want to download does not have read permission for TFTP.
Change the attributes of the file on the host.
You are trying to download to a directory that is not downloadable by TFTP.
If your source host runs AIX or Unix, use the directory /tmp, or configure the file
/etc/tftpaccess.ctl with lines beginning with 'allow:'. (check the documentation of
the daemon/server TFTPD. If you use another operating system (OS/2 or
others), configure the TFTP daemon on that system to accept downloads in the
desired directory.
You are trying to download a file that can only be uploaded (traces, error-log,
dumps).
Check the file type of the file to be downloaded.
7-36 ONcore ATM Switch/Control Module: Installation and User's Guide
