ARP client 7-27, 7-29
ARP server 5-18, 5-21, 7-25, 7-29
ATM Forum specifications 1-8
Auxiliary port 2-14
Available Bit Rate 1-7, 1-9
B
backplane in ATM subsystem 1-3
baud rate, configuring 4-7, 4-15
best effort data transmission 1-11
boot software 6-6
boundary hub 3-8, 5-16
C
cabling 2-5
console attachment B-2
for RS-232 ports B-2
modem attachment B-6
campus network 3-1, 3-3, 3-4, 5-15, 5-16
cells used in data transmission 1-3
changing configuration settings 5-32
classical IP over ATM networks 1-8, 5-18
clear causes from ONcore hubs C-2
clock 5-9
cluster number (ACN) 3-4, E-4
clusters 3-4, 3-6, 3-8, 5-15, 5-16
command completion 4-6
commands
entering from configuration console 4-3
getting help 4-5
keystroke functions 4-4
RESET ATM_SUBSYSTEM 2-12
REVERT 5-28
SAVE 5-25
SAVE ALL 2-6
SET ALERT 5-22
SET CLOCK 5-9
commands
(continued)
SET DEVICE 5-32
SET DEVICE ARP_SERVER 5-21
SET DEVICE ATM_ADDRESS 5-13
SET DEVICE COMMUNITY 5-22
SET DEVICE CONTACT 5-11
SET DEVICE
DEFAULT_GATEWAY 5-21
SET DEVICE IP_ADDRESS 5-18
SET DEVICE LOCATION 5-11
SET DEVICE NAME 5-10
SET DEVICE PASSWORD 5-6, 5-8
SET LOGICAL_LINK 3-8, 5-16
SET MODULE 5-32, 5-33
SET PORT 5-15, 5-32
SET STATIC_ROUTE 5-16
SET TERMINAL HANGUP 4-16
SET TERMINAL PROMPT 5-11
SET TERMINAL TIMEOUT 5-12
SHOW MODULE 5-29
SHOW PORT 5-29
TELNET 4-12
using command completion 4-6
community
setting access rights 5-22
configuration
6416SW 4-1
ATM media modules 5-33
ports 5-15
SNMP parameters 5-17
troubleshooting 7-10
configuration console
configuration 4-7, 4-15
remote 6416SW sessions 4-12
connections
point-to-multipoint 1-7, 3-13
point-to-point 1-7, 3-13
Index
X-2
