Setting the LECS ATM Address
To set the ATM address of the LAN emulation configuration server (LECS) enter the
SET LAN_EMUL CONFIGURATION_SERVER command. This is to support LECs
which get their associated LES ATM address from a LECS. LECs have three possible
ways to establish a connection to the LECS:
During ILMI, the LEC gets the unicast ATM address that is available from the ILMI
MIB (atmSrvcATMAddress). LECS ATM addresses can be defined to be returned
to the LEC during ILMI exchange. These LECS ATM addresses must be defined in
all ATM switches that deal with LECs requesting the LECS ATM address from the
ILMI MIB.
The LEC connects to the LECS using the well known address. You can define an
LECS ATM address to be substituted by the well known address. This address
must be defined in all ATM switches that are dealing with LEC connection requests
referring to the well known address.
The LEC connects to the LECS using a fixed PVC with vpi.vci equal to 0.17.
When defining a PVC for virtual channel connection (VCC), the allowed range for
VCI values includes the value 17.
ONcoreATM>set lan_emul configuration_server active_wka|inactive_wka
ONcoreATM>Enter ATM address: 39.99.99.99.99.99.99. . .99.99. 1. 2. .8 . 5.A9.
92.9F. [ENTER]
Entry set.
ONcoreATM>
5-23
