3Com 6416SW Manual

A SERVICE OF

next previous

Uploading Traces

To upload a trace log to the host, enter the following 6416SW commands at the

directory prompt:

1. SET TRACE (to enable and disable trace recording)

2. SET TFTP SERVER_IP_ADDRESS (to define the server connected to the 6416SW

module)

3. SET TFTP FILE_NAME (to define the path name of the file on the host)

4. SET TFTP FILE_TYPE (to specify the trace type)

5. UPLOAD INBAND (to upload the trace).

Uploading the Error Log

To upload the error log to the host, enter the following 6416SW commands at the

directory prompt:

1. SET TFTP SERVER_IP_ADDRESS (to define the server connected to the 6416SW

module)

2. SET TFTP FILE_NAME (to define the path name of the file on the host)

3. SET TFTP FILE_TYPE (to specify the error log)

4. UPLOAD INBAND (to upload the error log).

6-8 ONcore ATM Switch/Control Module: Installation and User's Guide