Working With Configuration Settings
The following sections describe how to:
Revert to previously saved configuration settings
Display the current configuration settings
Modify the current configuration settings.
Reverting Configuration Changes
Use the REVERT command to restore the configuration parameters that were active at
the time of the last SAVE. Any changes made using the SET command since the last
SAVE are lost.
The REVERT command has the same options as the SAVE command:
Alert
All
Community
Device
Module_port
Static_route
Terminal
TFTP.
For example, when working remotely, you may want to change the console prompt used
in your local 6416SW session to more easily identify it.
ONcoreATM> set terminal prompt atm2: [ENTER]
By using the REVERT TERMINAL command, you can later revert the prompt setting
back to the default:
5-28 ONcore ATM Switch/Control Module: Installation and User's Guide
