ports
(continued)
configuring logical links 3-8, 5-16
Console port 2-13
displaying configuration 5-29
status displayed by LEDs 2-10
troubleshooting 7-15, 7-19, 7-20
using NNI interface 3-8, 5-16
power supply problems 7-2, 7-9
problem determination
See
troubleshooting
prompt, configuring 5-11
Q
Q.2931
error codes C-2
protocol 1-9
quality of service (QOS) 1-11
R
RB
See
Reserved Bandwidth
RDN number 3-4
remote login via TELNET 4-12, 6-1
Reserved Bandwidth 1-7, 1-9, 1-11
RESET ATM_SUBSYSTEM
command 2-12
Reset button 2-12
Reset LED 2-10
resetting
ATM subsystem 2-12
REVERT command 5-28
reverting changes made with SET 5-28
routing domain (RD) 3-4
RS-232
connector pin numbers B-2
connector pin signal names B-2
RS-232 plug 6-9
RS-232 ports
Auxiliary 2-14
cabling B-2
Console 2-13
pin assignments 2-13, 2-14
Running LED 2-7, 2-10
S
SAAL protocol 1-9
SAVE ALL command 2-6
SAVE command 5-25
saving configuration settings 5-25
security 5-6, 6-4
selective backpressure in ATM traffic 1-11
servers
attaching to RS-232 port B-1
cabling B-2
SET ALERT command 5-22
SET CLOCK command 5-9
SET DEVICE ARP_SERVER
command 5-21
SET DEVICE ATM_ADDRESS
command 5-13
SET DEVICE command 5-32
SET DEVICE COMMUNITY
command 5-22
SET DEVICE CONTACT command 5-11
SET DEVICE DEFAULT_GATEWAY
command 5-21
SET DEVICE IP_ADDRESS
command 5-18
SET DEVICE LOCATION command 5-11
SET DEVICE NAME command 5-10
SET DEVICE PASSWORD command 5-6,
5-8
Index
X-5
