Chapter 3, “ATM Addressing” describes the components of an ATM
Campus network, guidelines for defining ATM addresses for the 6416SW,
how to set up trunk connections within and between networks, and how to
use Permanent Virtual Connections (PVCs). It also describes how to
connect a console to the 6416SW module in order to perform configuration
tasks.
Chapter 4, “Setting-Up and Using a Configuration Console” describes
how to set up and configure the 6416SW management console, set an
ATM address, and configure facilities for SNMP management and remote
login.
Chapter 5, “Configuring the ATM Switch/Control Module” describes
how to configure the 6416SW module after installing it in the ONcore hub.
Chapter 6, “Network and Switch Management” provides guidelines for
managing and maintaining the ATM Switch/Control.
Chapter 7, “Troubleshooting” describes how to diagnose and solve
problems associated with the installation and operation of the 6416SW
module, 6416SW console, and ATM subsystem in the ONcore hub.
Appendix A, “Technical Specifications” describes the technical
specifications for the 6416SW module.
Appendix B, “RS-232 Cable and Modem Requirements” describes the
RS-232 cable requirements and pin assignments for connecting a console
or modem to the 6416SW module's RS-232 Console port. It also describes
how to configure a modem connection.
Appendix C, “Error and Information Codes” describes the return codes
displayed for the Q.2931 protocol and Maintenance mode.
Appendix D, “Configuring AIX for Download and Upload Operations”
describes how to configure a server running AIX* for TFTP file transfers
with ATM ONcore hubs.
xviii ONcore ATM Switch/Control Module: Installation and User's Guide
