Setting Up Trunks (Logical Links)
To connect the 6416SW to another ATM switch, you must create a trunk using the SET
LOGICAL_LINK command.
See “Setting-Up ATM Trunk Connections” on page 3-8 for a description of the strategy
for setting up trunk links in an ATM network.
The
ONcore Switching Hub/CELLplex 4000 ATM Command Reference Guide
also gives
an example of the SET LOGICAL_LINK command.
Static Routes for Other Subnetworks
If a switch to which you want to connect resides in another ATM subnetwork, you must
also assign a local ATM cluster number (ACN) to the static route for that subnetwork.
The ACN you assign is used in the SET LOGICAL_LINK command to establish the
logical link between the two subnetworks.
For example, to map the static route ‘45337741531200010204’ to ACN 3:
ONcoreATM> set static_route 453377415312 1 2 4 3 [ENTER]
The static route you enter with the SET STATIC_ROUTE command can be up to 19
bytes.
5-16 ONcore ATM Switch/Control Module: Installation and User's Guide
