A SERVICE OF

logo

Open as PDF
next previous
STAT
STAT
RESET
RESET
MODULE
RESET
MODULE
RESET
ACTIVITY
ACTIVITY
PORT 1
PORT 1
1
1
2
2
3
3
4
4
PORT 2
PORT 2
PORT 3
PORT 3
PORT 4
PORT 4
RS-232 Console port
Figure 2-3. Attaching a Terminal to the 6416SW RS-232 Console Port
9. Attach cables to the ATM media modules and ATM user devices you want to use.
Then enter 6416SW commands from the console (as described in Chapter 5,
“Configuring the ATM Switch/Control Module” on page 5-1) to configure the ATM
subsystem.
10. Enter the SAVE ALL command from the console once you have configured all ATM
media modules. The 6416SW module saves the configuration information in
nonvolatile memory.
2-6 ONcore ATM Switch/Control Module: Installation and User's Guide