SLIP Support
The SLIP function is supported on:
TCP/IP for AIX version 3.2.5
TCP/IP V2.1.2 for IBM DOS V7 (no TFTP support)
TCP/IP V2.0 for OS/2 V3 (WARP)
ChameleonNFS V4.0 for Windows
Using TCP/IP for AIX version 3.2.5
1. Enter smitty mkinet
2. Enter serial line INTERNET Network Interface
3. Configure the local and remote IP addresses
4. The mask is not required
5. Do not fill in the baud rate and the dial string
6. PING the IP address of the remote 6416SW.
Using TCP/IP V2.1.2 for IBM DOS V7 (no TFTP support)
1. Use Custom command, then SLIP interface
2. Select SL and enable the interface
3. Select COM1 and 9600 modem speed
4. Configure the local and remote IP addresses
5. The mask is not required
6. PING the IP address of the remote 6416SW.
4-10 ONcore ATM Switch/Control Module: Installation and User's Guide
