A SERVICE OF

logo

Two Devices Using IP Over a PVC Cannot Ping Each Other
Steps to Take:
1. If the PVC is not active, make sure that the PVC is 'in-service' from ATMC or
'active' (from the terminal). If not, then try to re-enable that PVC.
2. The hardware connections may be failing, in which case replug the cables attached
to the devices.
3. If the source and destination IP addresses are not in the same IP subnet, check
both IP addresses. Change them so that they belong to the same IP subnet.
7-30 ONcore ATM Switch/Control Module: Installation and User's Guide