Filter
Top Products
Setup Menus
RT-10
3-45
To assign a new password:
When a user-defined password is assigned, that password must be
entered before a new password can be assigned. When the current
password is confirmed, the Parental Lock: Password Change screen
opens on the on-screen display.
Note:
If the assigned password is lost or forgotten, factory-
default settings must be restored to delete the
password (5-16). Then, a new password can be
entered.
1. When the Parental Lock: Password Change screen opens, use
the remote control number buttons to enter the new
password.
• When a number is entered, the cursor automatically
advances to the next character space. Press the arrow to
return to the previous character space or the arrow to
advance to the next character space.
2. When the new password has been entered, an ENTER button
appears on the on-screen display to indicate that pressing the
remote control ENTER button will assign the password.
Level 1 to 8, off(country code)
Assigns a user-defined security level, requiring the password before
the RT-10 will activate playback mode when a disc encoded with a
user-defined security level is loaded. The Level control has no effect
when a disc that is not encoded with a security level is loaded.
Select a number within the 1 to 8 range to assign a security level.
The 1 setting represents the highest level of security, and the 8
setting represents the lowest level of security. When a security level
is assigned, the RT-10 requires the user-defined password before
activating playback mode when a disc encoded with a higher
security level is loaded.
. . . General continues on page 3-46
Parental Lock: Password Change
–
Audio1 Language GeneralVideo1A2 V2
Move Exit
+/– Return
SETUP
– – –
Parental Lock: Password Change
1
Audio1 Language GeneralVideo1A2 V2
Move Exit
+/– Return
ENTER
SETUP
2 3 4
ENTER
3
21
6
54
+10
9
87
0