Filter
Top Products
Setup Menus
Lexicon
3-16
Audio Out 2 Channel, 5.1 Channel
Controls analog audio output format when the RT-10 is using the
analog audio output connectors.
When 2 Channel is selected, the RT-10 passes analog audio sources
to the Front L/R analog audio output connectors. When 5.1 Channel
is selected, the RT-10 passes analog audio sources to the Front L/R,
Surround L/R, Center, and Sub analog audio output connectors.
Refer to the table on the next page for more information.
The Audio Out parameter is associated with the Setup Navigator
Analog Jacks prompt (3-7). The Analog Jacks prompt and Audio Out
parameter settings have no effect when the RT-10 is not using the
analog audio output connectors.
Note:
The Audio Out parameter and Setup Navigator
Analog Jacks prompt can be used to select the desired
audio output format as long as a compatible audio
track is selected on the loaded disc.
AUDIO2
Includes parameters that control analog audio output format.
Audio Out --- 2 Channel
Speaker Setting
Gain Setting --- Fix
CD Digital Direct --- Off
A1 Language GeneralVideo1Audio2 V2
Move Exit
SETUP
2 Channel
5.1 Channel
Audio Out
Possible Settings
• 2 Channel
• 5.1 Channel `
N/A
• Fix `
• Variable
•On
•Off
Default SettingParameter
Audio Out 2 Channel
Speaker Setting N/A
Gain Setting*
Fix `
CD Digital Direct* Off
* These parameters only appear when the Setup menu is displayed in expert mode
(3-9 and 3-42).
` These settings are recommended when the RT-10 is connected to an MC-12 or MC-8
Digital Controller. When no setting is indicated, any setting can be selected.