Lexicon RT-10 CD Player User Manual


 
Setup Menus
Lexicon
3-44
When a number is entered, the cursor automatically
advances to the next character space. Press the arrow to
return to the previous character space or the arrow to
advance to the next character space.
The number entered in the selected character space
appears as an actual number. Numbers entered in
unselected character spaces appear as asterisks as shown
above.
2. When the assigned password has been entered, an ENTER
button appears on the on-screen display to indicate that
pressing the remote control ENTER button will confirm the
password.
If the assigned password has been entered, pressing the
ENTER button closes the Confirm Code Number screen
and opens the appropriate control screen.
If an incorrect password has been entered, pressing the
ENTER button does not close the Confirm Code Number
screen. Instead, the ENTER button grays and the cursor
returns to the first character space.
Password (continued)
To confirm the user-defined password:
When a user-defined password is assigned, that password must be
entered before the RT-10 will activate playback mode when a disc
encoded with a user-defined security level is loaded. The
user-defined password must also be entered before the Level and
Country Code controls can be adjusted.
Note:
If the assigned password is lost or forgotten, factory-
default settings must be restored to delete the
password (5-16). Then, a new password can be
entered.
1. When the Confirm Code Number screen opens, use the
remote control number buttons to enter the assigned
password.
ENTER
3
21
6
54
+10
9
87
0
Parental Lock: Confirm Code Number
Audio1 Language GeneralVideo1A2 V2
Move Exit
+/– Return
SETUP
Parental Lock: Confirm Code Number
*
Audio1 Language GeneralVideo1A2 V2
Move Exit
+/– Return
ENTER
SETUP
* * *
General (continued from page 3-43)