Filter
Top Products
To navigate Program tabs:
Button Command
Number Buttons Insert the corresponding value in the selected
field. Refer to page 2-15 for instructions to
enter values 10 and above.
Note the following:
• Program lists cannot contain values 100 and above or values
that are not included on the loaded disc. For instance, a
program title list cannot include a value of 5 if the loaded disc
does not include title 5.
• When a new value is inserted, no previously inserted values are
replaced or deleted. The new value is inserted in the selected
field, moving all previously inserted values in and to the right
of the selected field one field to the right. All previously
inserted values to the left of the selected field are not affected.
• The program list must include at least one blank field before a
new value can be inserted.
CLEAR Deletes the value in the selected field, moving
all previously inserted values to the right of the
selected field one field to the left. For instance,
the value to the immediate right of the selected
field moves to the selected field. A blank field
is inserted at the end of the program list.
& Scroll upward and downward through
Program tab items.
& Scroll to the previous and the next field. The
cursor will not scroll to blank fields.
Pause Inserts a pause in the selected field. Pauses
must be inserted between two values. In other
words, pauses cannot be inserted in the first
and last fields.
Playback Controls
Lexicon
4-22
A-B Repeat Playback (continued from page 4-21)
To deactivate A-B repeat playback:
• Press the A-B button or the remote control CLEAR button to
activate playback at the current playback time. In some cases,
the A-B button must be pressed twice in succession to
deactivate A-B repeat playback. The Repeat Off bar shown on
page 4-20 will open at the top of the on-screen display to
indicate that A-B repeat playback has been deactivated.
• Press the Stop button to activate stop or resume mode. In
some cases, the Stop button must be pressed twice in succession
to activate stop mode. When stop mode is activated, playback
cannot be reactivated at the current playback time.
PROGRAM MODE
• The remote control PROGRAM button can be used to activate
program mode, which creates a program list for the loaded
disc. When a program list has been created, program mode
also activates program playback. The table on page 4-12
indicates the program playback modes available for each disc
format.
• A program list is a user-defined playback order of titles,
chapters, groups, or tracks. The table on the next page
indicates the program lists available for each disc format.
• When playback of a program chapter or program track list is
activated, playback of a non-programmed chapter or track
might activate while the RT-10 searches for the next
programmed chapter or track.
PROGRAM