Setup Menus
Lexicon
3-32
Chroma Delay min to max
Compensates for misalignment of the Y (luminance) and C
(chrominance) components present in video signals.
Memory Off, 1, 2, 3
Determines the memory bank in which user-defined Video Adjust
settings are stored. The RT-10 includes three memory banks called
1, 2, and 3.
To configure and store memory banks:
1. Press the remote control VIDEO ADJ button to open the Video
Adjust bar shown above (first column, first row).
Video Adjust (continued )
Gamma + to –
Controls the brightness of darker picture elements.
Hue green to red
Controls the red-to-green color balance of video sources.
Chroma Level min to max
Controls the color saturation of video sources.
Video2 (continued from page 3-31)
Video Memory Select
Video Adjust
Video Setup
PureCinema Auto1 Auto2 On Off
Move Select Check
Auto1
DISPLAYENTER
YNR Off max
Move Select Check
DISPLAYENTER
Detail Off max
Move Select Check
DISPLAYENTER
CNR Off max
Move Select Check
DISPLAYENTER
MNR Off max
Move Select Check
DISPLAYENTER
BNR Off max
Move Select Check
DISPLAYENTER
Sharpness High soft fine
Move Select Check
DISPLAYENTER
Sharpness Mid soft fine
Move Select Check
DISPLAYENTER
White Level min max
Move Select Check
DISPLAYENTER
Black Level min max
Move Select Check
DISPLAYENTER
Chroma Level min max
Move Select Check
DISPLAYENTER
Gamma + –
Move Select Check
DISPLAYENTER
Chroma Delay + –
Move Select Check
DISPLAYENTER
Prog. Motion fast slow
Move Select Check
DISPLAYENTER
Hue green red
Move Select Check
DISPLAYENTER
Black Setup 0IRE 7.5IRE
Move Select Check
7.5IRE
DISPLAYENTER
Memory Off 1 2 3
Move Select Check
Off
DISPLAYENTER