Filter
Top Products
Setup Menus
RT-10
3-21
• The L/R distance parameter setting affects all other speaker
distance parameter settings. The C and SW parameters must
be set within 6.5 feet (2m) of the L/R parameter, and the LS
and RS parameters must be set within 20 feet (6m) of the L/R
parameter.
• When the L/R parameter setting is increased, other parameter
settings automatically increase in 0.5-foot increments within
their respective ranges. Likewise, when the L/R parameter setting
is decreased, other parameter settings automatically decrease
in 0.5-foot increments within their respective ranges.
• It is recommended to select the closest available setting when
the subwoofer distance falls outside the SW parameter range.
This should not affect surround cohesion.
Gain Setting Fix, Variable
Controls front, center, surround, and subwoofer channel output
levels when the RT-10 is using the 5.1-channel analog audio output
connectors. This parameter setting has no effect when the RT-10 is
using the 2-channel analog audio output connectors or digital
audio output connector.
Selecting Fix configures all channels to pass audio at its relative
recorded volume level. Selecting Variable opens the Gain Setting
screens, which can be used to adjust output levels within a –6.0 to
+6.0dB range.
Note the following:
• The Gain Setting parameter setting has no effect when the CD
Digital Direct parameter (3-24) is set to On and a CD source is
present.
• When Variable is selected, output levels can be calibrated for
the analog audio output connectors. Variable output levels do
not affect the digital audio output connector.
• In some cases, variable output levels might sound quieter than
fixed output levels.
Setting Variable Output Levels
The Gain Setting and Test Tone screens shown above can be used
to calibrate variable output levels for the front, center, surround,
and subwoofer speakers.
. . . Audio2 continues on page 3-22
L --- 0.0dB
C --- 0.0dB
R --- 0.0dB
RS --- 0.0dB
LS --- 0.0dB
SW --- 0.0dB
A1 Language GeneralVideo1Audio2 V2
Test Tone Select Exit
Return
Gain Setting
ENTER SETUP
LCR
LS RS
SW
L --- Off
C --- Off
R --- Off
RS --- Off
LS --- Off
SW --- Off
A1 Language GeneralVideo1Audio2 V2
Gain Select Exit
Return
Test Tone
ENTER SETUP
LCR
LS RS
SW
Audio Out --- 2 Channel
Speaker Setting
Gain Setting --- Fix
CD Digital Direct --- Off
A1 Language GeneralVideo1Audio2 V2
Move Exit
SETUP
Fix
Variable
Gain Setting
Variable
ENTER