Filter
Top Products
Setup Menus
RT-10
3-5
TV Type Widescreen (16:9), Standard (4:3)
Controls the appearance of the picture on the associated display
device screen, formatting the aspect ratio of the video output
format to match the aspect ratio of the display device. Aspect
ratios, which refer to width relative to height, differ among video
output formats and display devices. A 16:9 aspect ratio is almost
twice as wide as high and a 4:3 aspect ratio is almost square.
Select Widescreen (16:9) if the associated display device screen has
a 16:9 aspect ratio. Select Standard (4:3) if the associated display
device screen has a 4:3 aspect ratio. The appearance of the picture
depends on the TV Type prompt setting, the video output format,
the loaded disc, and display device settings.
The TV Type prompt is associated with the Video1 tab TV Screen
parameter (3-25). The TV Type prompt Widescreen (16:9) setting
is equivalent to the TV Screen parameter 16:9 (Wide) setting, and
the TV Type prompt Standard (4:3) setting is equivalent to the TV
Screen parameter 4:3 (Letter Box) setting. The TV Screen parameter
also offers settings for 16:9 (Compressed) and 4:3 (Pan&Scan)
viewing. Refer to the table on pages 3-25 and 3-26 for more
information.
1
2
TV Connection
4
5
Widescreen TV
16:9 aspect ratio
Setup Navigator
Widescreen (16:9)
Standard
Audio1 Language GeneralVideo1A2 V2
Move Select Exit
TV Type
Widescreen (16:9)
ENTER SETUP
!
Note:
• Some discs do not allow video output format
adjustments.
• Neither the TV Type prompt nor the TV Screen
parameter can be adjusted when the RT-10 is in
playback mode.
Analog Jacks 2 Channel, 5.1 Channel, Not Connected
Controls analog audio output format when the RT-10 is using the
analog audio output connectors. Select Not Connected if the RT-10
is not using the analog audio output connectors.
When 2 Channel is selected, the RT-10 passes analog audio sources
to the Front L/R analog audio output connectors. When 5.1
Channel is selected, the RT-10 passes analog audio sources to the
Front L/R, Surround L/R, Center, and Sub analog audio output
connectors. Refer to the table on page 3-17 for more information.
. . . Setup Navigator continues on page 3-6
1
2
Amp Connection
4
5
2 channel jacks for L/R
7
Setup Navigator
2 Channel
5.1 Channel
Not Connected
Audio1 Language GeneralVideo1A2 V2
Move Select Exit
Analog Jacks
2 Channel
ENTER SETUP
!