Lexicon RT-10 CD Player User Manual


 
1
2
Amp Connection
4
5
Sub-woofer is connected
to an amplifier
Setup Navigator
Present
Not Present
Audio1 Language GeneralVideo1A2 V2
Move Select Exit
Sub-woofer
Present
ENTER SETUP
!
Setup Menus
RT-10
3-7
Sub-woofer Present, Not Present
Indicates the presence or absence of a subwoofer. When Present is
selected, the RT-10 passes subwoofer signals (LFE) to the Sub
analog audio output connector. When Not Present is selected, the
RT-10 does not redirect low-frequency signals to other analog
audio output connectors.
The Sub-woofer prompt is associated with the Audio2 tab Speaker
Setting option, which can be used to set speaker sizes and
distances.
Digital Jack Refer to the table on page 3-3
Controls digital audio output format when the RT-10 is using the
digital audio output connector. Select Not Connected if the RT-10
is not using the digital audio output connector.
Select the setting that includes all digital audio sources with which
the associated component is compatible. The RT-10 will convert all
other digital audio signals to PCM signals before passing them to
the associated component. With the exception of the Not
Connected setting, all Digital Jack prompt settings assume the
associated component is compatible with PCM signals.
For example, the MC-12 and MC-8 Digital Controllers are
compatible with Dolby Digital, DTS, and PCM digital audio
sources. If the RT-10 is connected to one of these components,
select the Dolby Digital/DTS setting. The RT-10 will pass Dolby
Digital, DTS, and PCM signals directly to the MC-12 or MC-8. The
RT-10 will convert all other digital audio signals (i.e. MPEG) to PCM
before passing them to the MC-12 or MC-8.
Associated components that are NOT compatible with DTS
sources will output DTS noise when all of the following
conditions are met:
A DTS source is present.
The Digital Jack prompt is set to Dolby Digital/DTS or Dolby
D/DTS/MPEG OR the DTS Out parameter is set to DTS.
. . . Setup Navigator continues on page 3-8
1
2
Amp Connection
4
5
6
Compatible with Dolby Digital
Setup Navigator
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Audio1 Language GeneralVideo1A2 V2
Move Select Exit
Digital Jack
Dolby Digital
ENTER SETUP
!