Filter
Top Products
Setup Menus
RT-10
3-13
DTS Out DTS, DTSPCM
Controls DTS audio output format when a DTS source is present
and the RT-10 is using the digital audio output connector.
Select DTS if the associated component is compatible with DTS
sources. The RT-10 will pass DTS signals directly to the associated
component. Select DTSPCM if the associated component is not
compatible with DTS sources. The RT-10 will convert DTS signals to
PCM before passing them to the associated component.
Associated components that are NOT compatible with DTS
sources will output DTS noise when all of the following
conditions are met:
• A DTS source is present.
• The Digital Jack prompt is set to Dolby Digital/DTS or Dolby
D/DTS/MPEG OR the DTS Out parameter is set to DTS.
Audio DRC --- Off
Dolby Digital Out --- Dolby Digital
DTS Out --- DTS
PCM
Linear PCM Out --- Down Sample On
MPEG Out --- MPEGPCM
Digital Out --- On
SACD Playback --- 2ch Area
Audio1 Language GeneralVideo1A2 V2
Move Exit
SETUP
DTS
DTSPCM
DTS Out
The DTS Out parameter is associated with the Setup Navigator
Digital Jack prompt (3-7). The DTS Out parameter and Digital Jack
prompt settings have no effect when the RT-10 is not using the
digital audio output connector.
Linear PCM Out Down Sample On, Down Sample Off
Controls PCM digital audio output format when a 96kHz PCM
digital audio source is present and the RT-10 is using the digital
audio output connector.
Select Down Sample On if the associated component is not
compatible with 96kHz PCM sources. The RT-10 will downsample
96kHz PCM signals to 48kHz before passing them to the associated
component. Select Down Sample Off if the associated component
is compatible with 96kHz PCM sources. The RT-10 will not
downsample 96kHz PCM signals before passing them to the
associated component.
. . . Audio1 continues on page 3-14
Audio DRC --- Off
Dolby Digital Out --- Dolby Digital
DTS Out --- DTS
PCM
Linear PCM Out --- Down Sample On
MPEG Out --- MPEGPCM
Digital Out --- On
SACD Playback --- 2ch Area
Audio1 Language GeneralVideo1A2 V2
Move Exit
SETUP
Down Sample On
Down Sample Off
Linear PCM Out