Filter
Top Products
Setup Menus
Lexicon
3-34
Video Adjust (continued )
Prog. Motion fast to slow
Controls the still picture quality when the RT-10 is using the
component video output connectors. This parameter is not
available unless the RT-10 is using the component video output
connectors.
Selecting Video Adjust Banks
The Video Memory Select bar shown above can be used to select
the desired Video Adjust bank. The RT-10 offers six banks of Video
Adjust settings, including three preset banks for CRT, plasma, and
professional display devices and three memory banks for storage of
user-defined Video Adjust settings. The Professional bank is
automatically selected when factory-default settings are restored.
To select a Video Adjust bank:
1. Press the remote control VIDEO ADJ button to open the Video
Adjust bar shown above (left).
2. When the Video Adjust bar opens, press the remote control
and arrows to highlight the Video Memory Select option.
Then, press the ENTER button to select this option.
3. When the Video Memory Select bar opens, press the , , ,
and arrows to highlight the desired Video Adjust bank.
• When a bank is highlighted, its settings are automatically
applied to the picture on the display device screen,
allowing for previewing of bank settings. These settings are
automatically unapplied when a new bank is selected or
the Video Memory Select bar is closed.
Note:
Depending on the loaded disc and the associated
display device, previewed Video Adjust bank settings
might not be unapplied when a new bank is
highlighted. If this occurs, it is required to select a new
Video Adjust bank to cancel the previewed settings.
The selected bank settings will be automatically
applied to the picture on the display device screen.
4. When the desired Video Adjust bank is highlighted, press
the ENTER button to select this bank. Its settings will be
automatically applied to the picture on the display device
screen.
Video2 (continued from page 3-33)
Video Memory Select
Video Adjust
Video Memory Select
TV(CRT) PDP Professional
Memory1 Memory2 Memory3
Professional
ENTER